21st century chemical

21st century chemical +1 954-689-7111
Contact | Orders

Surfasolve Tool Cleaner

Surfasolve Tool Cleaner is a specially formulated non-hazardous, non-flammable solvent replacement system made from organic sources that is worker safe, and easy to use. Surfasolve Tool cleaner is used with our non-mechanical, non-heated workstation to quickly clean rollers and tools during lamination or as a gun flush for resin equipment. Cleaning is simple and efficient, there is no need to dry or blow off tools after using Surfasolve Tool cleaner.

Surfasolve Tool Cleaner has been fully evaluated on its effect in resin curing with little to no degradation in quantities as high as 10% of the resin. Residue from rollers will not cause resin to stop curing like most solvent replacements.

Surfasolve Tool Cleaner will continue to work even with a high level of resin load. Resin will continue to cure in the workstation and later on fall to the bottom as a floc. This material can be easily recovered through a simple drum filter as a solid non hazardous waste separated from the liquid Tool Cleaner. This process creates no hazardous waste and will greatly reduce costs associated with solvents such as acetone.


Applications

• Continuous duty cleaner for laminating
• Cleans rollers, brushes, squeegees,  tools, parts, etc.
• Flushing Chopper Guns
• Cleaning out equipment
• Removes and cleans off adhesives
• Super degreaser and cleaner
• Many more applications
Economy

• Very Slow evaporation
• Used over and over again
• Can eliminate hazardous waste
• Increased productivity as containers
  do not need to be filled and drained on
  a daily basis
• Can outlast 10-15 drums of solvent


Features & Benefits

• Excellent solvency on all resin systems
• No Greasy feel
• Non-flammable | No HAPs
• Ultra low vapor pressure
• No heat required | No moving parts
• Very Efficient and effective
• Residue from tools will not affect laminates
• Organic ingredients and quickly bio-degrades
• Ships DOT NON -REGULATED

 

Safety

• 100% biodegradable
• Non-flammable
• Very low toxicity profile
• No OSHA PEL or TLV requirements


Typical Properties

Density: 7.9 lbs per gal
Flash Point: Boiling point greater than 202ºF
Solubility in water: Complete
Surface Tension: 26 Dynes
Viscosity: 45 cps
Color: Clear/straw

 

 

 

 


Downloads
Surfasolve Tool Cleaner SDS ›
Surfasolve Tool Cleaner Tech Data Sheet ›

Product Features
Surfasolve Chemical Composition
Eliminate Dangerous Waste
Environmental Benefits
Health & Safety
Unique Applications
How Solvent Replacement Works
Making a Successful Change
Free Cost Analysis

acetone replacement
Interested in a FREE on site cost savings analysis of your facility?
Learn more ›

21st Century Chemical  |  2960 SW 23rd Terrace, Dania Beach FL 33312  |  954.689.7111